View TGA4539-SM_4841308.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

TGA4539-SM ka-band 1 watt power amplifier preliminary data sheet: rev f 10/11/12 ? 2012 triquint semiconductor, inc. applications ? point-to-point radio ? ka-band vsat ground terminal ? point-to-multipoint communications product features ? frequency range: 28 ? 30 ghz ? power: 30.5 dbm psat , 30 dbm p1db ? gain: 20 db ? bias: vd = 6 v, idq = 420 ma, vg = typical ? package dimensions: 5.0 x 5.0 x 1.3 general description the triquint TGA4539-SM is a ka- band amplifier. the TGA4539-SM operates from gh z and is designed using triquint?s power phemt production process. the TGA4539-SM typically provides saturated output power with small signal gain of the TGA4539-SM is available in a low mount 20 lead 5x5 mm qfn packa ge and is ideally suited for point-to-point radio, point-to - vsat communications. lead-free and rohs compliant evaluation boards are available upon request. amplifier - 1 of 14 - disclaimer: subject to change without notice connecting the digital world to the global network qfn 5x5 mm functional block diagram , 30 dbm p1db ma, vg = -0.59 v mm pin configuration band 1 watt power operates from 28 ? 30 z and is designed using triquint?s power phemt typically provides 30.5 dbm of saturated output power with small signal gain of 20 db. is available in a low -cost, surface ge and is ideally - multipoint and evaluation boards are available upon request. pin # 1, 2, 4, 5, 6, 10, 11, 12, 14, 15, 16, 20 3 7, 19 8 9 13 17 18 ordering information part no. eccn TGA4539-SM 3a001.b.2.c standard t/r size = 500 pieces on a 5 4 3 2 1 19 20 17 18 7 6 8 disclaimer: subject to change without notice e connecting the digital world to the global network ? mm 20l functional block diagram symbol n/c rf in vg vd1,2_bot vd3_bot rf out vd3_top vd1,2_top ordering information description ka-band power amplifier pieces on a 7? reel. 17 16 11 12 13 14 15 10 9
TGA4539-SM ka-band 1 watt power amplifier preliminary data sheet: rev f 10/11/12 - 2 of 14 - disclaimer: subject to change wit hout notice e ? 2012 triquint semiconductor, inc. connecting the digital world t o the global network ? specifications absolute maximum ratings parameter rating drain voltage,vd +8 v gate voltage,vg -5 to 0 v drain to gate voltage, vd ? vg 12 v drain current, id 984 ma gate current, ig 35 ma power dissipation, pdiss 6.9 w rf input power, cw, t = 25oc 22 dbm channel temperature, tch 200 o c mounting temperature (30 seconds) 260 o c storage temperature -40 to 150 o c operation of this device outside the parameter rang es given above may cause permanent damage. these are stress ratings only, and functional operation of th e device at these conditions is not implied. recommended operating conditions parameter min typical max units vd 6 v idq 420 ma id_drive (under rf drive, constant vg) 800 ma vg -0.59 v electrical specifications are measured at specified test conditions. specifications are not guaranteed over all recommen ded operating conditions. electrical specifications test conditions unless otherwise noted: 25oc , vd = 6 v, idq = 420 ma, vg = -0.59 v typical . parameter min typical max units operational frequency range 28 30 ghz gain 15.5 20 db input return loss 15 db output return loss 10 db output power @ saturation 29.5 30.5 dbm output power @ 1db gain compression 30 dbm output toi @ 26 dbm pout/tone 33 dbm gain temperature coefficient -0.06 db/c power temperature coefficient -0.02 db/c
TGA4539-SM ka-band 1 watt power amplifier preliminary data sheet: rev f 10/11/12 - 3 of 14 - disclaimer: subject to change wit hout notice e ? 2012 triquint semiconductor, inc. connecting the digital world t o the global network ? specifications (cont.) thermal and reliability information parameter condition rating thermal resistance, jc , measured to back of package tbase = 70 c jc = 21.9 c/w channel temperature (tch), and median lifetime (tm ) tbase = 70 c, vd = 6 v, idq = 420 ma, pdiss = 2.52 w tch = 125 c tm = 1.0 e+7 hours channel temperature (tch), and median lifetime (tm) under rf drive tbase = 70 c, vd = 6 v, id = 800 ma, pout = 30.5 dbm, pdiss = 3.8 w tch = 153 c tm = 9.6 e+5 hours 1.e+04 1.e+05 1.e+06 1.e+07 1.e+08 1.e+09 1.e+10 1.e+11 1.e+12 25 50 75 100 125 150 175 200 median lifetime (hours) channel temperature (c) fet3
TGA4539-SM ka-band 1 watt power amplifier preliminary data sheet: rev f 10/11/12 - 4 of 14 - disclaimer: subject to change wit hout notice e ? 2012 triquint semiconductor, inc. connecting the digital world t o the global network ? typical performance 0 5 10 15 20 25 26 27 28 29 30 31 32 33 gain (db) frequency (ghz) gain vs. frequency vd = 6 v, id = 420 ma, vg = -0.59 v, 25 c 25 26 27 28 29 30 31 32 28 28.5 29 29.5 30 30.5 31 output power (dbm) frequency (ghz) output power vs. frequency vd = 6 v, idq = 420 ma, vg = - 0.59 v, 25 c psat p1db 05 10 15 20 25 26 27 28 29 30 31 32 33 return loss (db) frequency (ghz) return loss vs. frequency vd = 6 v, id = 420 ma, vg = -0.59 v, 25 c irl orl 300 400 500 600 700 800 900 1000 0 5 10 15 20 25 30 35 -18 -14 -10 -6 -2 2 6 10 14 18 id (ma) output power (dbm), gain (db) input power (dbm) output power, gain, id vs. input power vd = 6 v, idq = 420 ma, vg = -0.59 v, 25 o c pout gain id @ 29.5 ghz 26 27 28 29 30 31 32 33 34 35 28 28.5 29 29.5 30 30.5 31 output toi (dbm) frequency (ghz) output toi vs. frequency vs power/tone vd = 6 v, idq = 420ma, vg = -0.59 v, 25 c 22dbm/tone 24dbm/tone 26dbm/tone
TGA4539-SM ka-band 1 watt power amplifier preliminary data sheet: rev f 10/11/12 - 5 of 14 - disclaimer: subject to change wit hout notice e ? 2012 triquint semiconductor, inc. connecting the digital world t o the global network ? typical performance (cont.) 0 5 10 15 20 25 26 27 28 29 30 31 32 33 gain (db) frequency (ghz) gain vs. frequency vs. bias vd = 5-7 v, id = 420 ma, 25 c 5v, 420ma 6v, 420ma 7v, 420ma 25 26 27 28 29 30 31 32 28 28.5 29 29.5 30 30.5 31 saturated power (dbm) frequency (ghz) power vs. frequency vs. temperature vd = 6 v, idq = 420 ma, vg = -0.59 v -40 c +25 c +85 c 0 5 10 15 20 25 30 26 27 28 29 30 31 32 33 gain (db) frequency (ghz) gain vs frequency vs. temperature vd = 6 v, id = 420 ma, vg = -0.59 v -40 c 25 c 85 c 25 26 27 28 29 30 31 32 28 28.5 29 29.5 30 30.5 31 saturated power (dbm) frequency (ghz) power vs. frequency vs. bias vd = 5-7 v, idq = 420 ma, 25 c 5v, 420ma 6v, 420ma 7v, 420ma 25 26 27 28 29 30 31 32 28 28.5 29 29.5 30 30.5 31 saturated power (dbm) frequency (ghz) power vs. frequency vs. bias vd = 6 v, idq = 330-500 ma, 25 c 6v, 330ma 6v, 420ma 6v, 500ma 0 5 10 15 20 25 26 27 28 29 30 31 32 33 gain (db) frequency (ghz) gain vs. frequency vs. bias vd = 6 v, id = 330-500 ma, 25 o c 6v, 330ma 6v, 420ma 6v, 500ma
TGA4539-SM ka-band 1 watt power amplifier preliminary data sheet: rev f 10/11/12 - 6 of 14 - disclaimer: subject to change wit hout notice e ? 2012 triquint semiconductor, inc. connecting the digital world t o the global network ? device characterization data load pull data rf performance of the TGA4539-SM is optimum when pl aced in the impedance environment specified below. these impedances are not the impedances of the device; th ey are the impedances presented to the device via a n rf circuit or load pull system. z load is the load impedance presented at pin 13. for loa d pull contours, refer to the TGA4539-SM product information page. the power data points shown below were measured in a load pull system. the power data points shown in ?typical performance? were measured using the input and outp ut structures shown in ?pc board tuning layout? and can vary from the load pull measurements. test conditions: vd = 6.0 v, idq=420ma, 25c input power for load pull: +16 dbm. z source for load pull: 50+j0 freq (ghz) load z load ( ) output power (dbm) 28.0 mag=0.371 ang=30.1 86.5 + j37.5 30.97 29.25 mag=0.339 ang=79.2 44.8 + j33.8 30.66 30.0 mag=0.375 ang=91.1 37.2 + j32.5 30.29 31.0 mag=0.429 ang=112.4 27.0 + j26.3 30.06 0 1.0 1.0 -1.0 10.0 1 0 . 0 - 1 0 . 0 5.0 5 . 0 - 5 . 0 2.0 2 . 0 - 2 . 0 3.0 3 . 0 - 3 . 0 4.0 4 . 0 - 4 . 0 0.2 0 . 2 - 0 . 2 0.4 0 . 4 - 0 . 4 0.6 0 . 6 - 0 . 6 0.8 0 . 8 - 0 . 8 swp max 3.1e+010 swp min 30.059 p4 p3 p2 p1 0 j50 +j50 28 ghz 29.25 ghz 30 ghz 31 ghz 50+j0
TGA4539-SM ka-band 1 watt power amplifier preliminary data sheet: rev f 10/11/12 - 7 of 14 - disclaimer: subject to change wit hout notice e ? 2012 triquint semiconductor, inc. connecting the digital world t o the global network ? application circuit vg can be biased from either side (pin 7 or pin 19) vd must be biased from both side (pins 8, 9, 17, 18 ) bias - up procedure bias - down procedure turn vg to -1.5 v turn off rf signal turn vd to +6 v reduce vg to -1.5v. ensure id ~ 0 ma adjust vg more positive until quiescent id is 420 m a. this will be ~ vg = -0.59 v typical turn vd to 0 v apply rf signal turn vg to 0 v .
TGA4539-SM ka-band 1 watt power amplifier preliminary data sheet: rev f 10/11/12 - 8 of 14 - disclaimer: subject to change wit hout notice e ? 2012 triquint semiconductor, inc. connecting the digital world t o the global network ? pin description pin symbol description 1, 5, 6, 10, 11, 15, 16, 20 n/c internally connected to 21; must be grounded o n pcb. 2, 4, 12, 14 n/c no internal connection; open on pcb for best pe rformance. 3 rf in input, matched to 50 ohms. 7, 19 vg gate voltage. see note 1 13 rf out output, matched to 50 ohms. 8,18 vd12_bot vd12_top drain voltage for 1 st and 2 nd stage. see note 2 9,17 vd3_bot vd3_top drain voltage for 3 rd stage. see note 2 21 gnd backside paddle. multiple vias should be employed to minimize inductance and thermal resistance; see mounting configuration on page 12 for suggested footprint. notes: 1. bias network is required; can be biased from either side (pin 7 or pin 19); see application circuit on page 7 as an example. 2. bias network is required; must be biased from both side (pins 8, 9, 17, 18); see application circuit o n page 7 as an example. 5 4 3 2 1 19 20 17 16 18 11 12 13 14 15 7 6 10 8 9 21
TGA4539-SM ka-band 1 watt power amplifier preliminary data sheet: rev f 10/11/12 - 9 of 14 - disclaimer: subject to change wit hout notice e ? 2012 triquint semiconductor, inc. connecting the digital world t o the global network ? applications information pc board layout top rf layer is 0.010? thick rogers ro3203, ? r = 3.02. metal layers are 0.5-oz copper. the pad pattern shown has been developed and tested for optimized assembly at triquint semiconductor. the pcb land pattern has been devel oped to accommodate lead and package tolerances. since surface mount processes vary from company to company, careful process development is recommended. for further technical information, refer to the TGA4539-SM product information page. detail on next page
TGA4539-SM ka-band 1 watt power amplifier preliminary data sheet: rev f 10/11/12 - 10 of 14 - disclaimer: subject to change wit hout notice e ? 2012 triquint semiconductor, inc. connecting the digital world t o the global network ? applications information (cont.) pc board tuning layout bill of material ref des value description manufacturer part number c1- c4 100 pf cap, 0402, 50 v, 5%, cog various c5, c6, c7 1 uf cap, 0603, 25 v, 10%, x5r various r1 15 ohms res, 0402, 0.1 w, smd various all performance data in this data sheet was measure d using the transmission line tuning elements shown at pins 3 ( rf in) and pin 13 (rf out). these transmission line dimension apply to transmission lines on 0.010? thick rogers ro3203, ? r = 3.02. dimensions are in millimeters [inches].
TGA4539-SM ka-band 1 watt power amplifier preliminary data sheet: rev f 10/11/12 - 11 of 14 - disclaimer: subject to change wit hout notice e ? 2012 triquint semiconductor, inc. connecting the digital world t o the global network ? mechanical information package information and dimensions all dimensions are in millimeters. the TGA4539-SM will be marked with the ?4539? desig nator and a lot code marked below the part designat or. the ?yy? represents the last two digits of the year the part was manufactured, the ?ww? is the work week, and t he ?xxxx? is an auto- generated number. the ocr-a 2d code has four rows a nd is the ?xxxx number, one digit per row. this package is lead-free/rohs-compliant with a cop per alloy base (cda194), and the plating material o n the leads is nipdau. it is compatible with lead-free (maximum 26 0 c reflow temperature) soldering processes.
TGA4539-SM ka-band 1 watt power amplifier preliminary data sheet: rev f 10/11/12 - 12 of 14 - disclaimer: subject to change wit hout notice e ? 2012 triquint semiconductor, inc. connecting the digital world t o the global network ? mechanical information (cont.) mounting configuration all dimensions are in millimeters (inches). note: ground / thermal vias are critical for the proper p erformance of this device. vias have a final plated thru diameter of 0.406 mm (0.016?). tape and reel information tape and reel specifications for this part are also available on the triquint website in the ?applicat ion notes? section. standard t/r size = 500 pieces on a 7 x 0.5? reel. carrier and cover tape dimensions part feature symbol size (in) size (mm) cavity length a0 0.207 5.25 width b0 0.207 5.25 depth k0 0.043 1.80 pitch p1 0.315 8.00 distance between centerline cavity to perforation length direction p2 0.079 2.00 cavity to perforation width direction f 0.217 5.50 cover tape width c 0.374 9.50 carrier tape width w 0.472 12.00 0.446 (0.017") 0.406 (0.016") 0.446 (0.017")
TGA4539-SM ka-band 1 watt power amplifier preliminary data sheet: rev f 10/11/12 ? 2012 triquint semiconductor, inc. product compliance information esd information esd rating: 1a value: passes 250 v min. test: human body model (hbm) standard: jedec standard jesd22- a114 msl rating level msl1 at +260 c convection reflow the part is rated moisture sensitivity level msl jedec standard ipc/jedec j -std-020. recommended soldering temperature profile amplifier - 13 of 14 - disclaimer: subject to change without notice connecting the digital world to the global network product compliance information human body model (hbm) a114 solderability compatible with lead- free solder maximum reflow temperature. package lead plating: nipdau the use of no- clean solder to avoid washing after soldering is recommended. this package is not compatible with solder containing lead. rohs compliance this part is compliant with eu 2002/95/ec rohs directive (restrictions on the use of certain hazar dous substances in electrical and electronic equipment). t his product also has the following attributes: ? lead free ? halogen free (chlorine, bromine) ? antimony free ? tbbp-a (c 15 h 12 br 4 0 2 ) free ? pfos free ? svhc free msl 1 at 260c per recommended soldering temperature profile disclaimer: subject to change without notice e connecting the digital world to the global network ? free solder ing processes, 260 clean solder to avoid washing after compatible with solder containing compliant with eu 2002/95/ec rohs directive (restrictions on the use of certain hazar dous substances in electrical and electronic equipment). his product also has the following attributes: halogen free (chlorine, bromine) ) free
TGA4539-SM ka-band 1 watt power amplifier preliminary data sheet: rev f 10/11/12 - 14 of 14 - disclaimer: subject to change wit hout notice e ? 2012 triquint semiconductor, inc. connecting the digital world t o the global network ? contact information for the latest specifications, additional product i nformation, worldwide sales and distribution locati ons, and information about triquint: web: www.triquint.com tel: +1.972.994.8465 email: info-sales@tqs.com fax: +1.972.994.8504 for technical questions and application information : email: info-networks@tqs.com important notice the information contained herein is believed to be reliable. triquint makes no warranties regarding t he information contained herein. triquint assumes no responsibility or liab ility whatsoever for any of the information contain ed herein. triquint assumes no responsibility or liability whatsoever f or the use of the information contained herein. th e information contained herein is provided "as is, where is" and with all f aults, and the entire risk associated with such inf ormation is entirely with the user. all information contained herein is subj ect to change without notice. customers should obt ain and verify the latest relevant information before placing orders for triq uint products. the information contained herein or any use of such information does not grant, explicitly or implicitl y, to any party any patent rights, licenses, or any other intellectual property rights, whether with regard to such information its elf or anything described by such information. triquint products are not warranted or authorized f or use as critical components in medical, life-savi ng, or life-sustaining applications, or other applications where a failure would reasonably be expected to cause severe perso nal injury or death.

▲Up To Search▲

Price & Availability of TGA4539-SM

	To Download TGA4539-SM Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .